Windows 7 will detect and pop up a wizard to install drivers when our is plugged in, but it’s also easy (as essential on other operating systems) to install the driver software first. Telugu input tools free download. Get the driver from: You’ll want to download the driver and unzip it anywhere on your desktop. Once you have, double click on it to start the installation. The installation is relatively simple and no questions are asked. When it’s done you should see something like this: Now go ahead and connect the adapter. For example, a USB controller card would be under Universal Serial Bus controllers. Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product. The ICUSB2322X 2 Port Professional Grade USB Serial Adapter converts a single USB port to two RS232 serial ports allowing you to connect to, monitor and control your serial devices. Rugged metal construction and sturdy wall-mount brackets provide a robust solution for both harsh industrial environments and simple desktop installations. You should get a pop-up looking like this: Finally Windows should report that the device has been installed: On Device Manager you should be looking at something like this: • Now, If you want to change the COM port assignment, here’s. Hi Norman, Because the USB serial adapters work with a wide range of legacy equipment they often require some configuration in order to work. Are you using Plugable adapters? If so, please contact us at. I’ll be happy to help with it. If you are using another brand, check in device manager for the Ports (COM & LPT) listing shown in the blog post above. If you installed the correct driver, and it’s not showing up there, it is possible your adapters have a counterfeit chip. Prolific has specifically written its drivers to check for a genuine chip and not work if the chip is fake. ![]() If you are sure the chip is genuine, and its not showing up in Device Manager for both adapters, it’s likely a software issue. If it is showing up in Device Manager, but not connecting to your computer, please make sure the COM port shown in Device Manager is set in the software you are using to communicate with your device and that you have the correct type cable (Null Modem or Straight) for your device and that the Port settings are correct. I hope this helps, David Plugable Support • ray-an. Hi Ajay, Thank you for posting. Usb 2.0 Serial Driver Free DownloadAre you using the Plugable USB-Serial adapter? If so, please contact us at. If it isn’t a Plugable serial adapter, it is difficult to troubleshoot, since many non-Plugable adapters have counterfeit chips in them and don’t work with the Prolific drivers. A few pointers though: 1. Go to Device Manager > Ports(Serial & LPT) and check which COM port the Prolific serial adapter is using.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |